Whatsapp Whatsapp

Spy Voice Recorder in Necklace Hidden Keychain Audio Recording Device 32GB – 12 Hours

Model: Pandent-32gb
In Stock
8,000.00 5,500.00
In Stock
Other people want this. 26 people have this in their carts right now.
Category:
Model: Pandent-32gb

Description

  1. Recording/Save

Without headphones, long-press the M button, and the red light will go on. After 3 quick flashes, the red light will go off to start recording. At the end of the recording, long-press the M button again. At this time, the blue light flashes 3 times before saving and shutting down.

Note: During recording, there is no sound or light. Do not connect to the computer, or you will lose the file while you are recording. Check whether the machine is in a recording state. In any case, click the M button, and the red light flashes, proving that the machine is recording.

  1. MP3 playback/Audio playback

Play: plug in the earphone, long-press M button, and let go when the blue light is on, then the machine turns on and plays MP3 automatically.

During the playback, long-press the play/pause button (button position as shown in the picture above) on the wire-controlled earphone and let go after the purple light flash to switch between music play/recording play. (Blue light slow flash for playing MP3/red light slow flash for playing recording file)

Note 1: The headphone socket of the recording pen has a card slot. When the headphone is connected to the recording pen, it must be inserted into place. * Note 2: If the red and blue lights flash alternately when you plug in your earphone and start playing MP3 or sound recording, it will prove that the recorder does not have MP3 songs or recording files.

  1. Voice Activated Recording

(When earphones unplugged) Hold the power button until the red light starts flashing. The red light will flash three times, then the device will start recording. The double click power button and purple light flashes once. Purple light flashes three times, the device will enter voice-activated mode.

note: To check if the device is in voice-activated mode, press the power button once. If blue light flashes, the device is in voice-activated mode.

  1. Deleting Files

Plugin earphones. When recordings/music is playing, double click  “play/pause” button on earphones to enter deleting mode (purple light flashes). Click “+” or “-“” on earphones to confirm deleting the recording/music you are listening to.

note: The device will delete the current recording or music that you are listening to.

  1. Volume adjustment / Tracks switching

1. When playing music/recording file, long press ‘+’/’ – ‘key (purple light flash) to

add or subtract volume.

2. When playing music/recording file, click ‘+’/’ – ‘key to switch tracks.

  1. Pause/fast forward and fast rewind

Play/Pause: When playing the music/recording file, click the play/pause button, and

then enter the pause state (the purple light lasts long at this time). Click again to

return to play.

Fast forward and fast rewind: when playing music/recording file, click the

play/pause button to enter the pause state. At this time, long-press the ‘-‘ key to

fast forward (purple light flash), and long-press the ‘t’ key to fast rewind.

(purple flash)

Note: The machine will shut down automatically 3 minutes after suspension without any operation.

  1. Time Synchronization

When the machine is turned off, insert the data cable into the computer to find the disk, open the synchronization tool, click ok, and then disconnect the data cable to complete time synchronization.

  1. Charging

Connect the computer or the power adapter with the data cable, the red light will flash slowly, and the blue light will stay on when it is fully charged. When the blue light comes on, it can be charged ‘for another hour, which makes the battery more powerful. (When the light is turned on, the red light flashes once or there is no response, indicating that the battery is out of power. At this time, the battery needs to be charged before it can work.)

Note: the recording pen should be charged or when the U disk is used, it is better to let the recording pen operate under the state of shutdown.

  1. Connecting Computer

Due to different computer operating system compatibility, in order to better transfer data, when connecting to the computer, please connect the recording pen through the data cable first, and then connect to the computer through the USB plug.

  1. Troubleshooting

1. The recording pen cannot work properly

Due to the occasional crash of the recording pen system software, it can be connected to the computer (the data cable is connected to the recording pen first, and then to the computer). At this time, the mobile hard disk drive will appear in my computer. Select the mobile hard disk drive, right-click, and select format. After formatting, restore to factory settings. Most faults can be eliminated at this time.

Note: After restoring to factory settings, the files in the recording pen will be lost. You need to make a backup before formatting and copy the files to the computer or other storage.

2. The recording pen is connected to the computer, but the computer doesn’t respond

First, check whether the USB port of the data cable is loose from the computer, and then check whether the data cable and recording pen are fastened in place. If your computer still doesn’t have a removable drive, try switching computers again. Some computers cannot read the disk due to the drive and setup of the computer system.

If you can’t read the disk after changing the computer, please contact customer service.

Safe operation Guide

1. It is strictly forbidden to contact any liquid, do not immerse the product in water or wet it, do not use the product in a rain or wet environment. Corrosion reaction may occur after contacting water inside the product, which may cause the battery to be natural or even explode.

2. If a fire occurs, please use water, water mist, sand, fire\ blanket, dry powder, and carbon dioxide extinguisher to extinguish the fire immediately.

3. Please use the product in an environment between 0 ‘C and 40 ‘C.

4. It is forbidden to disassemble the product in any way. If the battery is punctured during the disassembly, it will cause the leakage of liquid in the battery interior, even cause fire and explosion. Do not replace the battery without permission. If the battery is replaced improperly, it will be dangerous to explode. Only the same type or equivalent type of battery can be used under the operation of professional technicians To replace.

5. It is forbidden to impact, roll or empty the product by the machine. Do not place heavy objects on the product.

6. Do not place the product near the heat source or in a hot day car, and do not store the product in an environment of more than 60 °C. Claims of toxic or harmful! Substances or element

Design Small and elegant design, compact format, can be attached to keychain or necklace
Audio format - .WAV
Voice Activated Sensor Built-In
Voice activated – Configurable voice activated sensor
Recording while Charging Yes
Recording quality - Select-able 32, 64, 192, 384 up to 50ft
Built-in memory 32GB, 2400 hours at 32kbps
Time Stamp on Recordings Yes
Battery - rechargeable 100mAh/24 hours at 32kbps
Operating system -Windows XP/7/8/10, MacOS
Dimensions 4.5x1.6cm
Weight 16g

Reviews

There are no reviews yet.

Be the first to review “Spy Voice Recorder in Necklace Hidden Keychain Audio Recording Device 32GB – 12 Hours”

Your email address will not be published. Required fields are marked *